Availability:
🚚 SHIPPING INFORMATION: AUSTRALIAN OWNED & OPERATED - ORDERS ARE DISPATCHED FROM WITHIN AUSTRALIA Delivery within Australia is typically 2-7 working days. Tracking is provided. FREE EXPRESS AUS SHIPPING* on MOST orders over $149 & for all Winnerwell orders over $89. Flat rate of $16.95 for orders under $149. A small shipping fee will apply for larger boats. NO POBOX DELIVERIES
Electrafin Inflatable Paddleboard Kayak Electric Propeller
IT'S FINALLY ARRIVED!!
The first electric conversion kit for stand-up paddle boards and Kayaks!
A silent, zero emission, battery powered, electric conversion kit for stand-up paddle boards & Kayaks, turning your product into a human electric hybrid. Patent Pending.
Sprcifications
Variable Speed
Choose any speed. Travel at a mellow cruise or beat the current and accelerate to full speed of 4 - 5 mph *boat dependent*.
Fully recharge in 4 - 5 hours.
Use the 16.8 volt charger, swap in a fully charged spare battery or harness the power of the sun with our solar charging kit.
950 MPG
Compared to 20 MPG to on an equivalent sized gas trolling motor. Save money and resources while enjoying the great outdoors
Wireless Remote
Choose forward or reverse and control your speed at the touch of a button with the water resistant wireless remote.
12+ Mile Range
Extend your range. Travel 8 - 10 miles on high speed or 12 - 20 on low speed. The range lithium battery provides hours of fun.
Zero Emissions
The ElectraFin is emission free and can be charged using the power of the sun
Universal Fit
Choose your adapter. Installs on US fin boxes, slide-in fin boxes and kayak rudders.
Stainless Steel Hardware
Safe for fresh and salt water use. All components are waterproof and replaceable.
THE FIRST ELECTRIC CONVERSION KIT FOR STAND UP PADDLE BOARDS AND KAYAKS.
If your SUP is equipped with a standard fin box, the ElectraFin drops right in. If you have an inflatable kayak with a slide in fin, you can use the handy adapter made out of strong glass filled nylon. For inflatable kayaks you can install the adhesive fin box to get up and running, or mount the ElectraFin to your rear rudder system for hands free turning.
The motorized fin uses the same mounting system as a regular fin using a washer plate and screw. You can switch between a human powered SUP or a human-electric hybrid experience using the motor. With the quick install and removal, you can maintain the integrity of your board or boat, but have a long range electric propulsion system when you want it!
No tools are required for installation. This exciting new accessory enhances your ride whether you want to go further, fight head winds or currents or head out for some fishing.
POWER AT THE TOUCH OF A BUTTON
Turn off the ElectraFin: Hit the "Stop" button when you've reached your destination or decide to switch to human only paddling.
Safety Ring: A safety ring protects the rider, nearby
Emergency Stop Leash and On/Off Switch: In the case you are separated from the remote you can stop the ElectraFin by flipping the on/off toggle located on the control case to the off position. If the rider falls off the board, the emergency stop surf leash will disconnect from the control case and shut off the ElectraFin. The ElectraFin will not operate unless the emergency stop surf leash is connected to the control case. The rider must wear the surf leash at all times while operating the ElectraFin.
SPEED AND RUNTIME
The ElectraFin runs for two hours at a top speed of 4-5 MPH (6.5-8 KPH) six hours on low speed. The electric motor allows the ElectraFin to maintain top speed in strong current and head winds.
The easy to swap battery lets you stay out and travel at top speed longer. The Samsung 29E Lithium-ion cells provide a lightweight and long range power pack. Charge anywhere with Current Drives Solar Panel or charge your battery from any wall outlet. Charge time from full depletion: 4-5 hours. You can run at full speed with over 400 watts of peak power or turn the speed down with the remote and use Paddle Assist.
MOUNT THE ELECTRAFIN TO ANY INFLATABLE KAYAK, SUP, OR DINGHY
Using the glue on PVC fin box, you can add the ElectrFin to nearly all inflatable boats with a payload of under 600 pounds. You can find the Mount here
